AudioInRoom
http://www.zennio.com
Technical Support:
http://support.zennio.com
9
Paired Device
: the device has already been paired through the security PIN.
However, the audio-multimedia connection has been disabled. AudioInRoom
does not allow the user to play music in this state.
AudioInRoom allows up to two devices paired and connected, so that audio can be
played from any of them, although, logically, not at the same time.
If a third device is paired, one of the two previous devices will be deleted, which means
that it will have to be paired again if it wants to reconnect.
1.5
INICIALIZATION AND POWER TENSION
After a programming, a
Check-out
procedure is executed, which will also update the
Bluetooth module with PIN and device name values set by parameter.
With a power failure, the Bluetooth connection gets lost. This causes the source device
playback gets stopped. AudioInRoom has been designed so that audio source
playback can be recovered in a known status.
On the other hand, a KNX bus power failure
does not imply any change in the
device status since it has external power supply
. The Testing LED will red flashing
for information.
