Page 22 of 24
803341NZ - HydroTap Taps Install Instructions 09.18 v2.11
BLUE CHILLED TUBE
WHITE SPARKLING TUBE
JG Y-CONNECTOR
HOT & COLD
BRAIDED
HOSES
BOILING
or
CHILLED
TUBE
BRASS WASHER
BLACK RUBBER
SEAL
BRASS NUT
VENT
TUBE
(BOILING
MODEL)
USB
PLUG
Installation Instructions - Celsius Arc / Cube
RUBBER WASHER
Boiling
model Vent
outlet
6.2
Connect the Chilled Tube from the tap, via
the Y-Connector, to the Chilled and Spar-
kling tubes to the undersink unit
•
Pass all the hoses, tubes and USB
lead through the 35mm hole.
•
Ensure the black rubber seal is
correctly positioned to give a water
tight seal
•
Secure the rubber & brass washers
and large brass nut from inside the
cupboard space.
•
Affix the braided hoses for hot and
cold mains water supply.
FIT THE
RUBBER WASHER,
BRASS WASHER,
AND LARGE BRASS NUT
6.3
Chilled Sparkling Model
