Zenith DVB318, Installation And Operating Manual

Page: 2 / 32

2
Warning:
To reduce the risk of
electric shock, do not remove the
cover or back of this product. There
are no user-serviceable parts inside.
Refer servicing to qualified service
personnel.
Warning:
To reduce the risk of fire
or electric shock, do not expose this
product to dripping or splashing
water, rain, or moisture. Do not place
objects filled with water such as
vases, on the product.
WARNING
This digital video disc player employs
a laser system. Use of controls,
adjustments, or the performance of
procedures other than those
specified herein, may result in
hazardous radiation exposure.
WARNING
To prevent direct exposure to laser
beam, do not open the enclosure.
Visible laser radiation may be
present if open.
Warning:
Never stare directly into
the laser beam.
WARNING:
Do not install this
product in a confined space such as
a bookcase or similar unit.
Caution: To prevent electric shock,
match wide blade of plug to wide
slot, fully insert.
Attention: Pour éviter les choc
électriques, introduire la lame la plus
large de la fiche dans la borne
correspondante de la prise et
pousser jusqu’au fond.
FCC WARNING: This equipment may generate
or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction
manual. The user could lose the authority to
operate this equipment if an unauthorized
change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This product has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the product is operated in
a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this product does cause
harmful interference to radio or TV reception, which
can be determined by turning the product off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the product and
receiver.
• Connect the product into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC COMPLIANCE:
The responsible party for this
product’s compliance is: Zenith Electronics
Corporation, 2000 Millbrook Drive, Lincolnshire, IL
60069, USA. Phone: 1-847-941-8000
SERIAL NUMBER:
Locate the serial number on the back of the unit.
This number is only used on this unit. You should
write in requested information below and retain this
guide as a permanent record of your purchase.
Model No. ___DVB318____________________
Serial No. ______________________________
Date of Purchase_________________________
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN