Zenith DVB318, Installation And Operating Manual

Page: 10 / 32

10
Player Setup
The picture and sound of a nearby TV, VCR, or
radio may be distorted during playback. If this
occurs, position the player away from the TV,
VCR, or radio, or turn off the unit after removing
the disc.
DVD Player Connections
Depending on your TV and other equipment
there are various ways you can connect the
player. Please refer to the manuals of your TV,
stereo system or other devices as necessary for
additional connection information.
Video and Audio Connections to Your TV
Make sure the DVD player is connected directly
to the TV and not to a VCR, otherwise the DVD
image could be distorted by the copy protection
system.
Video : Connect the VIDEO OUT jack from
the DVD player to the video in jack on the TV
using the video cable (V).
S-Video : Connect the S-VIDEO OUT jack
from the DVD player to the S-Video in jack on
the TV using the S-Video cable (S).
Component Video : Connect the
COMPONENT VIDEO OUT jacks from the
DVD Player to the corresponding in jacks on
the TV using the Y Pb Pr cable (C).
DVI-D Digital Video : Connect the DVI-D
DIGITAL OUT jacks from the DVD Player to
the corresponding in jacks on the TV using
the DVI-type cable (D).
Tip: You can change the resolution
(480p, 720p, 1080i) for the component/
DVI-D video output by pressing
UPCONVERSION on the front panel.
480i is not available.
Audio Connection to Your TV:
Connect the left and right AUDIO OUT jacks
from the DVD Player to the audio left and right
IN jacks on the TV (A) using the audio cables.
Do not connect the DVD Player’s AUDIO OUT
jack to the phono in jack (record deck) of your
audio system.
R
L
AUDIO INPUT
VIDEO
INPUT S-VIDEO
INPUT
DVI-D INPUT
Y
Pb Pr
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Rear of TV
Rear of
DVD player
S A V D C
Installation and Setup
Notes for DVI and Component video output
• If your TV is a high-definition or “digital ready” TV, you may
take advantage of the DVD Player’s component/DVI-D
output for the high-resolution video possible.
• Component/DVI-D video output are useable only when your
TV is a high-definition or “digital ready” TV. If your TV does
not accept the high-resolution video format, the picture will
appear scrambled if you try to use the Component/DVI-D
video connections.
• The component video output is not available when the DVD
player is connected with TV using DVI-D and COMPONENT
simultaneously.
• The selected resolution and ouput resolution may be
different during palying back a DVD which copy protection
signals are recorded.
e.g., The ouput resolution is changed to 480p automatically
even though the selected resolution is 1080i.
• A DVI input is one that is compliant with HDCP
specifications. Check your TV or monitor’s user manual to
find out if the TV or monitor’s DVI input is compliant with
these specifications.
• Some HD Monitors designed for PC applications using
DVI-D may not work with this connection.