Zenith C32V23 - 32" Flat-Screen Integrated HDTV, Operating Manual & Warranty

Page: 42 / 56

P A G E 4 2
206-3767
Mini glossary
PROGRAMMING Procedure to set up remote to operate other equipment.
PRG Programming mode button.
DEVICE Infra-red remote controllable electronic accessory devices.
Programming the Remote
1
2
3
4
5
6
Set up your remote to operate other brand name devices
PRG POWER
CABLE VCR
AUX TV
SURF
-
FLASHBK MUTE
CHANNEL
CHANNEL
VOLUME
VOLUME
1 2 3
4
5 6
7
0
8 9
MENU
REWIND
F FWD
RECORD
ENTER
SIGNAL
AUDIO
CC
QUIT
SOURCE
PAUSE TIMER
PLAY
STOP
RATIO
VIDEO
7
4
6
Programming your Zenith remote may allow you to use
one remote to operate up to 4 different devices, if all
modes are programmed.
Once the device turns off, try the other functions. IF
they do not operate, try another code. Or, see page 45.
Not all devices will operate with your Zenith remote
control.
5
3
Turn on the device you want to program.
On the chart on page 46/47, find the type of device you’re
programming, and then find the brand name. Write down the
three-number code(s).
Press and hold PRG. It’s recessed so it doesn’t get pushed
accidentally. Use a small, blunt object. When the indicator
light turns on, you can release PRG.
Push the button name with the type of device you’re pro-
gramming: VCR, CABLE, AUX, TV.
Using the NUMBER keypad, enter the three-number code you
found on page 46/47.
Press ENTER to save the code. (The indicator light will flash
2 times, then turn off to indicate the code is valid.)
Point the remote at the device and push POWER. It should
turn off. If not, try the other codes listed and continue from
step three.
Note: To reset remote to factory settings, enter 9-1-1, in
Step 5.
7
Indicator Light
Mode / Product Compatibility
TV VCR CATV AUX
TVs VCRs Cable Boxes, All products on pp 46 - 47
DVDs Satellite Receivers