21
21
x
Economical
x
Easy
x
Road types
x
Unpaved Roads
x
Permit Needed
x
Motorways
x
Toll Roads
x
Charge Roads
x
Ferries
x
Cross-border Planning
ZENEC Navigation Software automatically recalculates the route if you deviate from the proposed
itinerary.
If your hardware supports TMC: Depending on the type of the TMC event, ZENEC Navigation
Software also recalculates the route if a TMC event concerns a part of the recommended route.
Depending on the type of the TMC event, ZENEC Navigation Software also recalculates the route if a
TMC event concerns a part of the recommended route.
For further information about Route Planning options, see page 62.
2.3.6 Itinerary
The Itinerary is the list of the route events, that is, the driving instructions.
When you are on the Map screen, you can display the Itinerary in one of the following ways:
x
Tap the area between the Turn preview and the Travel data fields where the symbol of the
second next manoeuvre is displayed (for example
).
x
Tap the following buttons:
,
,
.
You have the following options on the Itinerary screen:
Button
Description
Any of the list items
Opens the map with the selected manoeuvre in the middle.
Changes the detail level of the Itinerary. The levels are as follows:
x
Detailed Instructions: all intersections are listed
x
Itinerary: only significant intersections (the ones announced in
voice guidance) are listed
x
Road list: the list of the roads used while navigating the route
