20
20
x
a Favourite
x
a POI
x
a map marker Pin
2.3.2.4 Original position in the Cursor menu
When the Cursor menu is open, a special icon (
) shows the Cursor position the menu was
opened with.
You can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor
(
) appears, and the buttons of the Cursor menu initiate actions for this new location.
To return to the original Cursor position, tap
. The map jumps back to the position with which the
Cursor menu was opened, and the
icon appears again.
2.3.3 Daytime and nightcolour schemes
ZENEC Navigation Software uses different colour schemes during the day and during the night.
x
Daytime colours are similar to paper road maps.
x
The night colour schemes use dark colours for large objects to keep the average brightness of
the screen low.
ZENEC Navigation Software offers different daytime and night colour schemes. It can also switch
automatically between the daytime and the night scheme based on the current time and GPS position
a few minutes before sunrise, when the sky has already turned bright, and a few minutes after sunset,
before it becomes dark.
2.3.4 Colour scheme in tunnels
When entering a tunnel, the colours of the map change. All buildings disappear, the large objects
(such as surface waters or forests) and the empty areas between roads become black.
However roads and streets keep their original colours from the daytime or night colour scheme
currently used.
After leaving the tunnel, the original colours return.
2.3.5 Route calculation and recalculation
ZENEC Navigation Software calculates the route based on your preferences:
x
Route calculation method:
x
Fast
x
Short
