66
66
Button
Description
Baud Rate
The communication speed used between the TMC receiver and the
application.
Autodetect
Tap this button and let ZENEC Navigation Software find and connect
to the TMC receiver.
With a TMC receiver already connected, the content of the screen is different:
Button
Description
Use Auto-tuner
If Auto-tuner is enabled, the tuner of ZENEC Navigation Software
sweeps through the FM CCIR radio band searching for a TMC signal.
The first station with TMC data will be used automatically. When no
TMC signal is available, the tuner keeps on searching. Turn off Auto-
tuner to select a radio station manually.
,
When Auto-tuner is turned off, search for the desired radio station
manually with these buttons.
Exclude This Station
Push this button to put the currently received FM radio station on an
exception list, and make ZENEC Navigation Software search for
another station instead.
Show Excluded Stations
This button opens the list of radio stations previously excluded. You
can re-enable any or all of the excluded stations.
4.5.7 Warning settings
You can enable speed warning. Tap the following buttons:
,
,
.
Button
Description
Warn When Speeding
Maps may contain information about the speed limits of the road segments.
ZENEC Navigation Software is able to warn you if you exceed the current
limit. This information may not be available for your region (ask your local
dealer), or may not be fully correct for all roads in the map. This setting lets
you decide whether you wish to receive the warnings. You can set the
relative speeding level at which the application warns you (100%
represents the current speed limit):
x
In Built-up Areas: in cities and towns
x
Elsewhere: at all other locations
There are two types of warnings. You can turn them on or off
independently:
x
Audible Warning: A voice message is played using the selected
voice guidance profile.
x
Visible Warning: A symbol with the speed limit appears in the corner
of the map (for example:
).
