40 Rev.C
41 Rev.C
Icon
Function
Mobile phone currently connected
Battery capacity of the mobile phone currently connected
Signal strength of the current mobile network
BLUETOOTH STATUS BAR
BLUETOOTH SETUP
On the Bluetooth setup page you can adjust settings for Bluetooth operation. Press the appropriate
button / field to change any of the listed settings.
Function
Icon
Operation
Bluetooth
Settings
Tap to change settings for BT operation
Auto
Connection
ON / OFF
Contacts
Order
1. by first name of contact
2. by surname of contact
Microphone
Gain
Tap to set the Mic. gain from 0 to 12
Bluetooth
Adress
BT
Unique ZENEC BT device address.
Auto
Answer
ON / OFF
ON = Automatic call acceptance (after 3 ring tones) activated
OFF = Automatic call acceptance deactivated
Auto Load
Phonebook
ON / OFF
ACCEPTING/ENDING INCOMING CALLS (VIA DEVICE)
In the control-/operation panel touch the
numeric pad
.
Key in the desired phone number in full using the numeric pad. To set up the connection, touch
.
The display now changes to the call connection view.
DIAL A CALL USING NUMERIC PAD
Function
Icon
Operation
Accept
Tap the green handset to accept the call
Reject
Tap the red handset to reject the incoming call
End
Tap the red handset to end the call
DIAL A CALL USING PHONEBOOK
In the control-/operation panel touch the
phonebook.
From the phonebook list select a call partner and set up a connection by touching
.
After touching a contact you will be directed to the contact details view.
NOTE
Depending on the mobile phone and phonebook entries, the first synchronization can take up
several minutes.
