Zelmer ZWM0012, User Manual

Page: 8 / 52

8
PL EN
environments;
-bed and breakfast type environments.
Appliances are not intended to be operated by means of an
external timer or separate remote control system.
Proceed according to maintenance and cleaning section of
this manual for cleaning.
Disconnect the appliance when it is not in use and before
cleaning it.
Do not submerge the appliance in water or any other liquid.
This device is designed for use at a maximum altitude up to
2000 m above sea level.
IMPORTANT WARNINGS
Do not heat up the plates while it is open.
Place the appliance on a flat even surface.
Any incorrect use or improper handling of the product shall render the warranty null and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the product
label.
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and / or feet wet.
Do not pull on the connection cord in order to unplug it or use it as a handle.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an official
technical support service. In order to prevent any risk of danger, do not open the device. Only qualified technical
personnel from the brand´s Official technical support service may carry out repairs or procedures on the device.
B&B Trends S.L. disclaims all liability for damages that may occur to people, animals or objects, for the non-
observance of these warnings.
Before using your appliance for the first time
Clean the plates (2) using a damp sponge rinse and dry carefully.
After applying a fine coating oil to the plates, close the appliance and plug it in
The indicator Power light (red) (4) and ready light (green) (5) will come on.
Allow it to heat up for several minutes to get rid of the new smell.