Zelmer ZVC345SA, User Manual

Page: 44 / 48

50
ZVC345-001_v02
VACUUM CLEANER ZVC345 TYPES
Workmanship
and
equipment
option
Type
Adjustable suction power
Dust bag full indicator
No bag protection
Dust bag/Amount
Outlet filter
Suction tube
Combination brush
Small nozzle
Crevice nozzle
Small brush
Brush for collecting pet
hair from carpets
Parquet brush “BNB”
1 2 3 4 5 6 7 8 9 10 11 12 13
ZVC345SA + + + SAFBAG 1 piece EPA E11 Telescopic + + + + + –
ZVC345SP
+ + +
SAFBAG 1 piece EPA E11 Telescopic
+ + + + – +
Technical parameters
The type of the vacuum cleaner and the technical parameters
are indicated on the rating label. Mains protection 16 A.
Does not cause interferences with audio/video devices.
Does not require grounding
.
ZELMER vacuum cleaners meet the requirements of the
applicable norms.
The appliance is in conformity with the requirements of the
directives:
–
Electrical equipment designed for use within specific
voltage limits (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
The device meets the requirements of Commission
Regulation (EU) No. 666/2013 on implementing the Directive
of the European Parliament and of the Council 2009/125/EC
with regard to eco­design requirements for vacuum cleaners.
The device complies with the requirements of the
Commission Delegated Regulation (EU) No. 665/2013
supplementing Directive of the European Parliament and of
the Council 2010/30/EU with regard to energy labelling of
vacuum cleaners.
Noise level: 77 dB(A).
The appliance was marked by a CE sign on the rating label.
Static electricity
In the process of vacuuming of some surfaces in areas of
low air humidity the device may become electrically charged.
It is a natural phenomenon – it does not damage the device,
and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend you to:
●
discharge the device by touching metal items in the room
with the pipe,
●
increase air humidity in the room,
●
use widely available antistatic agents.
Appliance elements
A
1 Accessory compartment cover
2 Combination brush fastening
3 Plug and cord
4 Cord rewind button
5 Outlet filter cover
6 Handle
7 ON/OFF button
8 Dust bag full indicator
9 Power decrease button
10 Suction power level indicator
11 Power increase button
12 Upper cover fastening
13 Suction hose
14 Telescopic suction tube
15 Outlet filter EPA E11 (installed in the vacuum cleaner)
16 Inlet filter (installed in the vacuum cleaner)
17 Inlet filter casing (installed in the vacuum cleaner)
18 SAFBAG dust bag module (with the installed SAFBAG
dust bag)
19 Parquet brush “BNB” (type ZVC345SP)
Is used to clean and polish hard, scratch sensitive
surfaces such as wooden floors, floor panels, parquet,
marble, tiles, etc.
Delicate and soft natural bristles ensure maximum
vacuum effectiveness and protects against scratching
the cleaned surface.
20 Switch­over nozzle brush
21 Brush for collecting pet hair from carpets (type
ZVC345SA)
22 Small nozzle
23 Crevice nozzle
24 Small brush