Zelmer ZTS2910X, User Manual

Page: 37 / 39

37
ZTS2910X-001_v02
SUGGESTION
Information on the product
and suggestions for its use
●
The appliance is intended for household use only,
indoors.
●
Before making the first piece of toast, run the toaster
once or twice without any food item at the maximum
degree of heat. This will significantly eliminate the
“new” smell of the device.
●
When you turn on and use the toaster for the first
time, as far as heating up the heating elements may
have a slight smell of ‘burnt’. This is not a threat nor
any evidence of malfunction of the product. The smell
should disappear after repeated use.
●
Never attempt to remove jammed
toast, bread rolls, croissant or other
baked goods with a knife or other tool,
because the contact with live parts
could cause an electric shock. Allow
the appliance to cool, remove the plug
and gently remove the bread.
●
Only use the appliance indoors at
room temperature and up to 2000 m
above sea level.
CAUTION!
Not observance can result in
damage to possessions
●
Remove all promotional stickers or packaging material
prior to use the toaster for the first time.
●
Provide adequate space above and on the sides of the
toaster in order to allow the free circulation of air. Avoid
the device’s contact with curtains, wallpaper, clothing,
towels or other flammable materials during use. Do not
use under cabinets or curtains. Caution is required in
the case of surface where heat can be a problem - it is
recommended to use a thermal insulation pad.
●
Bread can catch fire, so do not use bread toasters near
flammable materials or under combustible materials
such as curtains.
●
Use a toaster with crumb tray placed on the device.
●
Do not allow to collect the crumbs. Do not allow to
collect the crumbs. Regularly clean the crumb tray in
order to prevent the risk of fire.
●
Always connect the appliance to the power socket
(alternating current only) equipped with a grounding
prong, with a voltage indicated on the name plate.
●
The equipment is not designed to work with external
time switches or a separate remote control system.
●
When using do not leave the device unattended,
because the bread can be ignited.
●
Never allow wire hanging over the edge of the table or
countertop, or touch hot surfaces or was curled.
●
Never place the device on or near gas or electric
burner, or where it might come into contact with a hot
oven or microwave.
●
Never cover the device when connected to a current
or is hot.
●
Do not load the device with bread that contains sugar,
jam or other additives.
●
Bread to be baked should be sized for your toaster,
it should not protrude above the opening for bread
loading and should not be too thick or too long in order
not to block nor to jam the toast lift.
●
Do not use harsh, abrasive or caustic cleaning agents
to clean the device.
Technical parameters
The toaster technical parameters are included at the name
plate.
Composition of the toaster
A
1 Bread slots with adjustable width
2 Button DEFROST – frozen bread toasting
3 Button REHEAT – reheating of bread
4 Button CANCEL – cancel/stop the toasting
5 lever
6 Browning adjustment knob
7 Crumb tray
8 Power cord storage compartment
Maintenance and operation of the
toaster
●
Place the toaster on a dry, flat surface away from potential
heat sources (heating plates/panels, cookers, ovens, etc.).
●
Insert the plug into an AC wall outlet.
1 Place the bread into the bread slots.
Make sure that the bread crumb tray is in the
appliance.
2 Select the desired browning with the adjustment knob.
9 browning degrees are available.
When the toaster is switched on and used
for the first time, select position 3 (standard
setting). Different bread types and individual
preferences may require different settings.
With the same browning degree, one slice of
bread will be toasted better than two slices of
bread toasted simultaneously.
B