background image

before using your Kenwood

appliance

Read these instructions carefully
and retain for future reference.

Remove all packaging and any
labels.

safety

Burnt food can catch fire, so:

never leave your toaster on
unattended;

keep your toaster away from
anything (eg curtains) that could
catch fire;

select a shorter time for thin or dry
bread;

never warm food with a topping: if it
drips into the toaster, it could catch
fire. If warming sandwiches with a
filling always use the sandwich cage
and follow the instructions provided.

Clean the crumb tray regularly:
crumbs can smoke or burn.

Sandwich fillings could melt and
drip into the toaster. Take care as it
could catch fire.

To avoid electric shocks, never:

let the toaster, cord or plug get wet;
or

put 

your hand 

or anything metal,

other than the sandwich cage, into
the toaster.

Always unplug the toaster when not
in use, before cleaning or
attempting to remove any trapped
sandwich cage/food.

Never cover your toaster with a
plate or anything else - it could
overheat and catch fire.

Never let the cord hang down
where a child could grab it.

We recommend that you do not
use your toaster directly under wall
cupboards.

Do not move the toaster whilst it is
in operation.

Never touch hot surfaces.

Never use an unauthorised
attachment or accessory.

When making sandwiches never
place more than 2 slices of bread
into each sandwich cage.

Never place sandwiches into the
toaster without first placing them
into the sandwich cage.

Never use a damaged toaster. Get it
checked or repaired: see 'Service'.

Do not let infirm people use the
appliance without supervision.

Do not let children use or play with
the appliance.

Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper
use, or failure to comply with these
instructions.  

before plugging in

Make sure your electricity supply is
the same as the one shown on the
underside of your toaster.

This toaster complies with
European Economic Community
Directive 89/336/EEC.

Important – UK only

The wires in the cord are coloured
as follows:
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.

The appliance must be protected
by a 13A approved (BS1362) fuse.

WARNING: THIS APPLIANCE

MUST BE EARTHED.

Note:

For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).

If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.  

before using for the first time

Wrap excess cord around the cord
storage device on the underside of
the toaster.

Operate the toaster once with the
timer set to 3 without bread.

As with all new heating elements,
your toaster may emit a slight
burning smell when it is first
switched on. This is normal and not
a cause for concern.

key

lever (with 'Hi-Rise™' for extra lift)

slot selector switch/Indicator light

on/off/timer control

crumb tray

sandwich cage (one supplied with
TT930, two supplied with TT940)

cord storage

to use your toaster

1 Raise the lever.
2 Insert the bread, muffins, bagels

etc, 

3 Connect to the power supply. 
4 Lower the lever.
5 Select the number of slots:-

2 slot toaster (TT930 series)

Use the left hand slot when toasting
one slice of bread, a single item of
food or the sandwich cage. Select
this slot by pressing the left side of
the slot selector switch marked ‘I’.
To select both slots press the right
hand side of the slot selector switch
marked ‘II’.

4 slot toaster (TT940 series)

Depress the left hand side of the
slot selector marked ‘II’ to select
the two slots on the left hand side
of the toaster.

Depress the right hand side of the
slot selector marked ‘IIII’ to select
all four slots.

Important 

For best results, food should be
inserted into ALL the selected slots.
If any slots are left empty the food
will toast unevenly.

6 Use the on/off/timer control and

select the required setting. Toasting
will start immediately and the slot
selector switch will illuminate.
It is advisable to initially start off
with a lower setting until you
become familiar with the toaster.

7 The timer will make a ticking noise

as it counts down and when it
reaches ‘0’ a bell will sound. The
heating element will switch off and
the slot selector indicator light will
go out. The toast will NOT pop up
but will keep warm inside the
toaster.

8 To remove the toast raise the lever.

The lever is fitted with an extra rise
position which will lift the carriage to
a higher position to allow for small
items to be removed more easily.

Important

– At any time the lever

can be raised to inspect or remove
the toast. To switch off the
elements turn the timer back to ‘0’.
If the timer does not return to ‘0’
after each operation, the toaster will
automatically switch off after
approximately 6 minutes. To
continue toasting return the timer
control to ‘0’ before re-selecting the
required setting.

9 After use, unplug the toaster.

KENW

OOD

KENW

OOD

KEN

WOOD


 

Reviews: