Zelmer zsb0800-001, User Manual

Page: 34 / 36

38
ZSB0800-001_v01
●
Preferably consume beverages immediately after
preparation. Use a glass or ceramic container to store
the beverages. Store juices in the refrigerator.
After operation
In order to stop the appliance, turn the speed control knob
(7) to position 0 .
●
Hold the motor unit (6) with one hand, catch the jug
handle with the other hand and remove it out of the
motor unit (7) turning it counter-clockwise.
●
Remove the lid (2) out of the blender jug (3) .
●
Unplug the appliance from the mains supply when not
in use.
Cleaning and maintenance
Clean after operation as soon as possible,
to prevent the pulp accumulation inside the
jug (3).
●
Pour about 1,000 ml of water into the jug (3) , turn the
dial to the turbo position and hold for about 10 seconds.
●
Then empty the blender jug (3) , turn it upside-down
and dry.
●
If necessary, wash the jug (3) , lid (2) , lid cup (1) blade
unit (5) in warm water with some washing-up liquid.
Do not wash the cutting blades directly by
hand. The blades are very sharp.
●
Then rinse it under clean running water and dry.
●
If you left the jug for longer time without cleaning and
some particles glued to the jug inner, use nylon brush.
●
Except for seal (4) , the jug (3) (excluding blade unit) and
the lid overlay (1) do not wash any part of the appliance
in a dishwasher.
●
Clean the outsider of the motor housing (6) with damp,
gentle cloth.
Do not immerse the motor housing (6) in water
or other liquid.
●
Do not clean the outside of the housing (6) with
aggressive detergents such as emulsion milk or pastes,
etc. They can remove information graphic symbols.
●
Do not clean the transparent jug (3) with harsh sponges
or clothes.
●
After washing dry thoroughly all the parts of the appliance.
Disassembling of the cutting unit
1 Disconnect the plug of the supply cord from the mains
supply outlet.
●
Remove the jug (3) from the motor unit (6) .
2
Remove the lid (2) from the blender jug (3) .
3 Turn the blender jug (3) “upside down” and place it on
the flat, firm surface.
4
Hold the blender jug with one hand (3) , and rotate the
blade unit (in clockwise direction).
C
9 Switch on mixing turning the speed control knob (7) to
appropriate position ( turbo, 1, 2 ).
10 Hold the lid down during operation.
Do not open the lid during operation!
11 In order to stop the appliance turn the speed control
knob to 0 position.
12 Turbo function
Turning the knob to turbo position shall cause a short
operation of the appliance with maximum speed, for the time
you hold the knob.
Speed Examples of use
0 Turn off the appliance.
1 Prepare drinks with the addition of peeled,
soft fruits / vegetables such as peaches,
kiwi, etc.
1 - 2 Blend soups.
Prepare dairy cocktails.
2 Prepare beverages from hard fruits/
vegetables, e.g.,. 600 g carrots and 900 ml
of water.
Prepare sauces.
Shred hard fruits / vegetables.
Prepare meals for children.
Turbo Intermittent operation at maximum speed.
Do not use it longer than 2 minutes, otherwise
it can get overheated. After this time, stop the
appliance for at least 10 minutes, allowing it to
cool to room temperature.
To ensure the long appliance life it is
recommended to not exceed 1 min of
continuous operation. After this time, stop the
appliance for at least 10 minutes, allowing it to
cool to room temperature.
●
When you need to add some ingredients during
operation of the jug blender, lift the lid overlay (1) , insert
new ingredients into the inlet, and replace the lid overlay
(1) again.
●
Make sure, that the ingredients you add, shall not
increase the volume of the ingredients over the “MAX
1750 ml” mark on the blender jug (3) .
Prepare fruits and vegetables
●
Wash or peel fruits / vegetables.
●
Remove any fruit/vegetable seeds, stoned and cores.
●
Cut the fruits / vegetables into pieces to fit through the
lid opening (2) .
●
Do not use fibrous fruits / vegetables, such as raisins.
●
Fruits / vegetables should be as fresh as possible.