Zelmer zsb0800-001, User Manual

Page: 33 / 36

37
ZSB0800-001_v01
●
Do not unplug by pulling on cord.
●
The supplying cord shall not be hanged over the edge
of the table or board, nor touch any hot surface.
●
Do not fill the jug in with boiling liquids.
●
The temperature of mixed ingredients should not
exceed 60°C.
●
Keep the jug blender and supplying cord away from
hot surfaces and burners.
●
If it is possible, store the jug blender away from direct
sun radiation and glow-like light.
●
Never store with lid closed on the blender jug.
●
Do not overflow the jug. In case the liquid gets under
the motor housing, it can be vacuumed into the motor,
causing its damage.
●
Do not fill the jug over 1500 ml mark.
●
After 2 minutes of continuous operation, stop the
appliance for at least 10 minutes, allowing it to cool to
room temperature.
●
To ensure the long appliance life it is recommended
to not exceed 1 min of continuous operation. After
this time, stop the appliance for at least 10 minutes,
allowing it to cool to room temperature.
●
Do not operate when the jug is empty, as it can get
overheated.
●
Use a soft brush to clean the cutting blades.
●
The appliance is intended for indoor household use
only.
●
The appliance should be unplugged from the power
source when not in use.
●
Do not use the appliance if the blade is damaged.
The outline of the appliance
1 Lid overlay
2 Lid
3 Blender jug
4 Gasket
5 Blade unit
6 Motor unit
7 Speed control knob
8 Power cord compartment
Handling and operation
Preparation for operation
Before using you jug blender for the first time (or after
storage for a prolonged period of time), thoroughly wash all
the attachments that come into direct contact with food in
hot water with an addition od washing-up liquid, rinse and
dry well. Keep your hands away from the blades — they are
extremely sharp.
Instructions for use
●
Place the motor unit (6) on dry, firm, horizontal surface,
near the mains supply outlet and out of the children access.
Arrange the supplying cord so, that it does not
hang out of the table or counter to avoid risk of
being pulled or caught on.
1 Connect the plug to the mains supply outlet.
Before you connect the appliance to the power,
make sure that the speed control knob (7) is set
in 0 position.
2 Assemble the blender jug (3) on the motor unit, so that
the symbol on the motor unit (6) is in line with mark on
the jug.
3 Lock the blender jug (3) rotating it in clockwise direction
so that the symbol on the motor unit (6) is in line with
mark on the jug.
The handle of the blender jug (3) should be
located on the right side of the appliance.
4 Insert the ingredients into the jug (3) .
5 Do not load over the 1500 ml mark on the jug (3) .
6
Before you use the jug blender, insert the lid (2) on the
blender jug (3) .
7 Lock the lid (2) on the blender jug (3) rotating it in
clockwise direction until it moves.
8 Insert the lid overlay (1) into the lid inlet (2) .
Don’t start the jug blender without the lid
overlay (1), especially, when solid ingredients
shall be used. They can be ejected through the
lid inlet.
A
B
TIP
Product information and tips
for use
●
The jug blender is intended for domestic usage only.
In case it is used for gastronomic business purposes,
warranty terms and conditions change.
●
During first start-up the appliances can emit some
odours. It is a normal phenomenon, which should be
over after a time.
Technical specification
Technical parameters are indicated on the nameplate of the
product.
Admissible time of uninterrupted operation: 2 minutes.
Time of interval before next operation: 10 minutes.
Maximum noise level: 90 dB/A.
The appliance does not require to be connected to a wall
outlet with grounding prong.