Zelmer ZFD2350W, User Manual

Page: 29 / 31

29
Dehydration is achieved by the circulation
of hot air through the trays. The drying time
depends on the content of water in products
and their fragmentation. For example, when
drying apples, it is recommended to use slices
not thicker than 5 mm.
3 Insert the plug into a wall outlet. Switch on the appliance
by pressing the On/Off button . The appliance will start
operating on power I setting. The indicator light 2c will
come on.
Never use the appliance with trays in the folded
position!
For even drying result, it is recommended to
change the position of sieves from time to time
during operation. Note that drying products
with high water content, such as plums, grapes
or wet mushrooms takes much more time.
4
To change the power level, press the power adjust button
. The indicator light 2d will come on.
The appliance has two power settings (250 W
and 500 W). Press the button to switch
between power level I and II.
Changing the heating power does not affect the
timer setting.
5 Set the time using the and buttons 2f .
If the timer is not set, the appliance will run for
24:00 hours and will turn off automatically after
that time.
After pressing or , the appliance will
start a countdown timer accurate to 1 minute.
The time can be adjusted between 30 min and
24 hours (with 30 minute increments). Press
and hold
or to accelerate the
adjustment.
6
Press to switch off the appliance. If the countdown
function is used, the appliance will turn off automatically after
the selected period of time.
If you use the button to switch off the
appliance or countdown timer is used
(automatic switch-off) the appliance will enter
standby mode. Flashing
message will
be displayed.
To completely switch off the appliance, pull the
plug from the wall socket.
Technical data and description
The technical data are given on the nameplate.
This device complies with Commission Regulation (EC)
no. 1275/2008 on eco-design requirements.
Nominal capacity: 11 l.
Noise level (L
WA
): 66 dB/A.
Construction of the appliance
1 Heat-and-ventilation unit
2 Control panel
a
On/Off switch
b Power level switch
c
Indicator light – power level I (250 W)
d
Indicator light – power level II (500 W)
e
Display
f Time adjustment button and
3 Drying trays (4 pcs.)
The drying trays may be adjusted between two positions:
a
Folded position – only for storing the appliance
(saving space)
b Extended position – for using the appliance (a large
gap is visible between the trays)
4 Lid
5 Cord storage compartment
6 Power cord
Use and operation
Before using the appliance for the first time,
disassemble it and wash all parts that come
into contact with the processed food products
(see „Cleaning and Maintenance”). Reassemble
once dry.
1 Place the appliance on hard, dry and level surface near
a wall socket.
2
Distribute the food on drying trays and place the trays
in the extended position 3b on the heat and ventilation
unit 1 . Apply the lid
4
. To extend the trays, rotate them 90
degrees relative to each other so that a large gap is visible
between them.
Distribute food products loosely on trays,
making sure not to block the airflow through
the trays. Choose the number of trays
according to the amount of food you intend
to dry.
A
B
●
Clean all parts of your appliance thoroughly before first
use.
●
Unplug the appliance after use.