Zelmer HC1001, User Manual

Page: 106 / 112

106
HC1001-001_v01
CHARGING THE BATTERY ALONE
Before removing the battery, make sure the appliance is off and the adaptor
connector is disconnected from the charging port on the appliance.
1
Press the battery release button.
2
Remove the battery.
3
Insert the adaptor connector into the charging port on the battery. Insert the adaptor
plug into a suitable mains supply outlet (see the rating plate on the adaptor).
– Charging the battery outside the appliance takes approximately 12
hours.
– The charging process may be terminated earlier than 12 hours by the
overcharge protection circuit.
4
Unplug the adaptor after charging and detach the connector from the charging slot.
To unplug the adaptor, never pull on the power cord as this may damage
the unit. Hold the adaptor firmly and pull it out of the power outlet.
5
Replace the battery. To do this, insert the lug of the battery under the housing of the
appliance.
6
Push the battery all the way in toward the appliance until it clicks into place.
A fully charged appliance has a cordless operating time of up to 50
minutes.
Handling and operation
PLACING, REMOVING & REPLACING ATTACHMENTS
Select appropriate attachment for your desired hair length.
●
Each attachment comb is marked with a different hair-length setting. The
setting is located on the outside of each attachment (e.g. 4-6 mm).
1
Mount the attachment on the sides of the appliance. The lugs on the attachment must
lock into small grooves located on both sides of the appliance.
2
To change the attachment, pull one side of the attachment gently outwards until the lug
is detached from the groove on the appliance. Remove the attachment.
3
Replace with your selected attachment as described in section 2.
F
G