Zelmer HC1001, User Manual

Page: 103 / 112

103
HC1001-001_v01
Battery memory effect
To prevent the memory effect, recharge the battery only when it is fully discharged.
What is the memory effect?
When repeatedly charged before it is completely discharged, the Ni-MH battery used in the
appliance gradually loses its maximum energy capacity.
What should I to do if the memory effect occurs?
If the operation time of the appliance is shorter than it used to be despite fully charged
battery, allow the battery to discharge completely and recharge it for about 12 hours.
Repeat this step 2-3 times to recalibrate your battery to its maximum available life. If the
memory effect continues, the battery may need to be replaced. Please contact your dealer
for further information.
RECHARGING THROUGH THE CHARGING PORT ON
THE APPLIANCE
1
Make sure the appliance is OFF.
2
Insert the adaptor connector into the charging port.
To prevent damage to the appliance, make sure the charging port is dry
before inserting the adaptor connector.
3
Insert the adaptor plug into a suitable mains supply outlet (see the rating plate on the
adaptor).
– Charging of the battery used in the appliance takes approximately 90
minutes.
– The charging process may be terminated earlier than 90 minutes by the
overcharge protection circuit.
– The charge indicator glows red when charging.
– When the battery is fully charged, the charge indicator light turns green.
Unplug the adaptor from the mains after charging.
●
To unplug the adaptor, never pull on the power cord as this may damage
the unit. Hold the adaptor firmly and pull it out of the power outlet.
A fully charged appliance has a cordless operating time of up to 50
minutes.
B