Zelmer HC1001, User Manual

Page: 104 / 112

104
HC1001-001_v01
CHARGING WITH THE CHARGING STAND
Charging in horizontal position
Check if the appliance is OFF.
●
1
Insert the adaptor connector into the charging port on the stand.
To prevent damage to the appliance, make sure the charging port is dry
before inserting the adaptor connector.
2
Place the appliance (without any attachments) on the charging stand. Make sure the
charging port on the appliance rests safely on the charging connector on the stand.
3
Connect the adaptor plug into a suitable mains supply outlet (see the rating plate on
the adaptor).
– Charging of the battery used in the appliance takes approximately 90
minutes.
– The charging process may be terminated earlier than 90 minutes by the
overcharge protection circuit.
– The charge indicator glows red when charging.
– When the battery is fully charged, the charge indicator light turns green.
Unplug the adaptor from the mains after charging.
●
To unplug the adaptor, never pull on the power cord as this may damage
the unit. Hold the adaptor firmly and pull it out of the power outlet.
Operating time with fully charged battery is about 50 minutes.
Charging with the appliance placed on the vertical support
Check if the appliance is OFF.
●
1
Insert the adaptor connector into the charging port on the charging stand.
To prevent damage to the appliance, make sure the charging port is dry
before inserting the adaptor connector.
2
Press the vertical support release bottom.
3
Place the appliance on the vertical support. Make sure that the charging port on the
appliance rests safely on the charging connector on the stand.
Connect the adaptor plug into a suitable mains supply outlet (see the rating plate on
●
the adaptor).
C
D