50
CK1173-001_v02
5
Place the kettle on the rotating power base (4).
Plug the power cord into the wall outlet with grounding
prong.Once plugged in, you will hear a single beep indicating
that the appliance is ready for operation. The symbol will
flash twice on the display (7a) and then the current water
temperature will be displayed.
6
To turn start heating water, press the button once —
you will hear a single beep and LED indicator (7d) will be on.
7
To keep water warm, press the button once — you
will hear a single beep and LED indicator (7e) will be on.
8
To turn off the kettle, press the button again — you
will hear a single beep and LED indicator (7e) will turn off,
and display (7a) will show the current water temperature.
Kettle is in standby mode.
The button operates in three modes: boil,
keeping warm and off. To turn off the kettle
when BOIL function is used, you need to cycle
through the keep warm mode by pressing the
button twice.
Do not operate the kettle if water level is below
the „min” or above the „max” mark (3).
The default temperature for boiling water is
100°C while keep warm temperature is 70°C.
Keep warm/boil
9
Water temperature can be set in the range of from 50°C
to 100°C at 5°C steps. When the kettle is in standby mode,
set the temperature by pressing the +/– temperature adjust
-
ment buttons. Then press to turn on the kettle.
You can also change water temperature during kettle opera
-
tion. When you set temperature below current water tempe
-
rature the kettle will turn off into standby mode.
10
Current water temperature is displayed on the LCD
(7a) during kettle operation. When water has boiled or has
reached the set temperature the appliance turns off automa
-
tically and three beeps will be heard. The water temperature
is displayed on the LCD (7a) for 15 minutes and then the
display turns off.
Keep water warm
11
You can keep water warm in the range of from 50°C to
100°C. Press the button twice to keep water warm.
12
When the kettle is in keep warm mode, set the tempe
-
rature by pressing the +/– temperature adjustment buttons.
Keep warm function can operate for a maximum of two
hours.
The kettle maintains the set temperature in the range of
3°C – 5°C. When the actual water temperature exceeds the
set value, eg. 70°C the display shows the set temperature
of 70°C. When the water temperature is lower than that set
temperature, the display shows the actual water tempera
-
ture.
All settings will be reset when you remove the ket
-
tle from its base.
When water temperature in the kettle is higher
than the set keep warm temperature, kettle will
remain in standby mode until the temperature is
below the set temperature and then water will be
reheated.
If you plan to regularly use the kettle, you do
not need to unplug it from the wall outlet.
Kettle features thermal protection. If you turn
on an empty kettle it will be automatically shut
off by a thermal switch. To turn on the kettle
once it has cooled down (after approximately
15 minutes), remove it from the base, fill with
water, replace on the base and press the
button. Do not fill the hot kettle with cold water
- wait until it cools down.
Cleaning and maintenance
Always allow the kettle to cool down com
-
pletely before cleaning!
1
Unplug the kettle from the mains.
2
Remove the filter
(8)
and rinse it under running water.
3
Clean the outside surfaces with a soft damp cloth
and washing-up liquid.
In order to remove the build-up of hard water film from the
outside and inside walls of the kettle, wipe them with a damp
cloth and vinegar.
4
Rinse the kettle with clean water. Before putting the
device away, dry all of its parts.
Various deposits can form on the sides of the
kettle, and they can also get into the water. This
is because of the presence of minerals natu
-
rally occurring in water (calcium, magnesium,
iron, etc.). These discolourations are not the
result of malfunction and do not cause pro
-
blems for using the device. If larger amounts
of deposits form, they should be removed (see
“Dissolving limescale deposits”).
C
Summary of Contents for ck1173
