![background image](http://html1.mh-extra.com/html/zelmer/686/686_manual_3343890054.webp)
54
The broken coupling should be replaced with a new one:
−
unscrew the coupling from the feed screw,
−
remove the broken coupling,
−
put on the new coupling and screw it.
Preparing the meat mincer to work and the actuation of the appliance
In meat mincer, type 886 pull out the appropriate length of the cord plug from the
storage compartment.
−
Place the drive unit close to the power network socket, on a firm surface so as not
to cover the ventilation holes within the casing.
−
Before the first use of the meat mincer, wash the equipment elements.
−
Assemble the appropriate equipment and join it with the drive unit.
−
Put the power cord into the supply network socket.
−
Turn the meat mincer on with the main switch.
The screen’s rut has to fit
with the chamber’s protrusion
Operating the mincing set
−
Put the following elements into the mincing chamber:
−
feed screw with the coupling towards the middle,
−
put the cutter knife on the feed screw end, with the sharp edges facing outside,
−
put the screen so that the chamber’s protrusion enters the rut of the screen.
−
Tighten all the elements of the mincing set – until home.
−
Put the assembled unit (1) onto the drive unit (2) and turn into the position, when
you hear click of the safety lock.
−
Put the food tray onto the mincing chamber.
Put on and then turn
Operating the sausage stuffer
−
Put the following elements into the mincing chamber:
−
feed screw with the coupling towards the middle,
−
separator on the feed screw end,
−
the sausage stuffer.
−
Tighten all the elements of the mincing set – until home.
Before placing the sausage intestine (intestine wrapper) soak it in warm water for
about 10 minutes.
−
Put the wet sausage intestine onto the sausage stuffer, paying attention not to
cover the venting holes within the sausage stuffer.
The meat mass filling the intestine cannot be “too rare”. Large amount of fluids can
cause their leakage and permeating to the interior of the mincing machine.
Mincing chamber
Feed screw
Summary of Contents for 686
