4. Access Control
4.1 Metal Key Pad Operation
The default code for the doors are pre-set in the factory
as follows:
z
Front door - 2580
z
Back door – push button
FOR FURTHER INSTRUCTION TO PROGRAM DOOR
CODES. SEE USER MANUAL
4.2 Biometric / Card Reader
The Zella Pro is supplied with a default card which will
open the front door. The rear door is opened by the push
button located inside the Zella Pro.
See
user manual for programming options. Use card
reader until you are ready for biometric access mode.
4.3 L.E.D. Key Pad Operation
The default code for the doors are pre-set in the factory
as follows:
z
Front door – 2580#
z
Back door – push button
FOR FURTHER INSTRUCTION TO PROGRAM DOOR
CODES. SEE USER MANUAL
Front panel description
Card reader
Fingerprint reader
Key Pad
Card reader
3 x 4
Matrix
Keypad
Case Screw
Bell Button
(with BL-D40)
Antenna
(AC-Q42 & AC-Q44 only)
Door
Indicator
Mode
Indicator
