MAS7.1 Component Video Switch
MAS7.1 Component Video Switch
Instructions (Cont'd)
Installing the Remote Control's Battery
Orient the remote so the you are look ing a the backside
(buttons facing away from you).
Slide the batter y holder out by pressing the small tab on
the left, towards the center, while pulling downward on the
holder.
Orient the batter y with the positive terminal (+) up (as
illustrated).
Slide the batter y holder back in place, until it clicks.
Using the supplied Remote Control
Use the section of the remote controlled labeled: MAS7
for controlling the MAS7.1. ( The other sections are used to
control other Zektor products.)
Each button on the remote functions the same as the front
panel switch with the same name.
•
•
•
•
•
•
1 2 3 S1 S2 S3 SYNC
1
5
2
3
4
1
2
3
1
2
3
1
2
3
S1
S2
S3
A1
A2
SYN
SEL
4
HDVI5/HDMI5
MAS7
CVS4
SAS6x2
Using the supplied Remote Control
Use the remote controller buttons in the section la-
beled: MAS7. (The other sections control other Zektor
products.)
Each button on the remote corresponds to the same
button on the MAS7.1's front panel.
Installing the Remote Control's Battery
CR2025
3V
+
To open: Press small tab
towards center...
1
2
While pressing tab, pull downward.
