Activate VIDEO OUT
You may activate video out when you want to
look at the picture on a TV instead of on the
installed display. To do that, connect the supplied
AV-cable with the black plug to the video output
of the camera-eyepiece. The yellow plug is
connected to the respective Cinch-input of your TV.
Then turn on the camera-eyepiece and select the
TV standard for your TV (PAL or NTSC).
Note: The quality of the TV picture is clearly worse than the actual image captured.
The reason for that lies in the low resolution of the TV image (640 x 480 pixels).
To do that, select Option [VIDEO OUT].
You will get to this option via [MAIN MENU], [SETTINGS].
Option
Function
[VIDEO OUT]
[OFF]
[PAL]
[NTSC]
The selection is made with the SCROLL-button
or
and is saved
with the OK-button.
In Europe you will select the PAL setting, and in the US the NTSC-setting.
In the OFF setting the video output is deactivated and the installed monitor
is activated.
Caution
When video out is activated, the monitor automatically turns off. If you have activated
video out by accident, simply turn the camera-eyepiece off using the ON/OFF switch.
When turning the unit on again, the installed display is reactivated.
51
VIDEO OUT
OFF
PAL
NTSC
604270_ZEISS GBH_03 Vict_DC4 S_32–60 eng / S. 51 /
Pantone Reflex Blue
/
Schwarz
Victory Camera-Eyepiece DC4
03 Vict_DC4_32-62_eng_pan.qxd4 11.10.2006 9:32 Uhr Seite 51