Einstellen der ABSCHALTZEITEN
Sie können verschiedene Zeiten für STROMSPAREN
und ABSCHALTEN vorgeben. In der Einstellung
STROMSPAREN wird lediglich das Display abge-
schaltet. Durch einen beliebigen Tastendruck auf
die Fernbedienung wird das Display wieder ange-
schaltet. Bei abgeschaltetem Display sinkt der
Stromverbrauch um ca. 60 %. In der Einstellung
ABSCHALTEN wird das komplette Gerät abge-
schaltet. Diese Funktion ist hilfreich, damit das
Kamera-Okular nicht versehentlich angeschaltet
bleibt.
Wenn die Funktion STROMSPAREN aktiviert ist, blinkt die Diode neben dem EIN-/AUS-Schalter.
Ein Blinken in der Farbe Grün signalisiert ausreichende Batteriekapazität. Blinkt die Anzeige
in der Farbe Rot, muss der Akku gewechselt werden.
Wählen Sie die Option [ABSCHALTZEITEN] aus.
Die Option wird erreicht über [HAUPTMENUE], [EINSTELLUNGEN].
Option
Funktion
[ABSCHALTZEITEN]
[STROMSPAREN]
Die Auswahl erfolgt mit den SCROLL-Tasten
oder
.
In der Einstellung AUS ist die Funktion deaktiviert.
Für die Funktion STROMSPAREN sind Zeiten zwischen 10 Sekunden und
3 Minuten wählbar.
Ein beliebiger Tastendruck schaltet das Gerät wieder ein.
[ABSCHALTEN]
Die Auswahl erfolgt mit den SCROLL-Tasten
oder
.
In der Einstellung AUS ist die Funktion deaktiviert. Für die Funktion
ABSCHALTEN sind Zeiten zwischen 1 Minute und 30 Minuten wählbar.
Zum Einschalten muss die Taste EIN/AUS am Kamera-Okular gedrückt werden.
604270_ZEISS GBH_02 Vict_DC4_S3–31_deu_pan.qxd4 / S. 20 /
Pantone Reflex Blue
/
Schwarz
20
Gebrauchshinweise
ABSCHALTZEITEN
STROMSPAREN
: < AUS >
ABSCHALTEN
: < AUS >
02 Vict_DC4_S3-31_deu_pan.qxd4 11.10.2006 9:30 Uhr Seite 20