![background image](http://html1.mh-extra.com/html/zeiss/victory-dc4/victory-dc4_instructions-for-use-manual_3324933051.webp)
Set POWER OFF TIMES
You may enter different times for STANDBY and
POWER OFF. In the STANDBY mode, only the dis-
play is turned off. By pushing any of the buttons
on the remote control, the display is turned on
again.
When the display is turned off, the power con-
sumption is reduced by approx. 60 %. In the
POWER OFF setting, the complete unit is turned
off. This function is useful to prevent the camera-
eyepiece from remaining on by accident.
When the function STANDBY is activated, the diode next to the ON/OFF switch blinks.
Blinking in green signals means that there is sufficient battery capacity. Blinking in red
signals means that the battery must be replaced.
Select the option [POWER OFF TIMES].
You will get to this option via [MAIN MENU], [SETTINGS].
Option
Function
[POWER OFF TIMES]
[STANDBY]
The selection is done with the SCROLL-button
or
.
In the OFF setting, this function is deactivated.
You may select times between 10 seconds and 3 minutes for the STANDBY
function.
Pushing any button turns the unit on again.
[POWER OFF]
The selection is made with the SCROLL-button
or
.
In the OFF setting, this function is deactivated. You may select times
between 1 minute and 30 minutes for the POWER OFF function.
To turn the unit on, push the ON/OFF button at the camera-eyepiece.
50
POWER OFF TIMES
STANDBY
: < OFF >
POWER DOWN
: < OFF >
604270_ZEISS GBH_03 Vict_DC4 S_32–60 eng / S. 50 /
Pantone Reflex Blue
/
Schwarz
User Information
03 Vict_DC4_32-62_eng_pan.qxd4 11.10.2006 9:32 Uhr Seite 50