![background image](http://html1.mh-extra.com/html/zeiss/stemi-dv4/stemi-dv4_operating-instructions-manual_3472863033.webp)
OPERATION
Stemi DV4 / DR
Core accessories
Carl Zeiss
B 40-003 e 08/00
3-15
•
The camera is ready for operation.
☞
When taking photos in transmitted light with a lamp voltage close to U
max
(blue LED of the
illumination control is blinking!), remember that the lamp voltage is reduced to constant
voltage after three minutes!
•
For the operation of the camera, see the operating manual "SONY Digital Still Camera Cybershot
DSC-F505"!
3.2.3.4
SONY camera "Digital Still Camera
Cybershot DSC-S70"
•
Screw adapter ring VAD-S70 (3-18/
2
, SONY)
into the objective/filter thread of the DSC-S70
camera (3-18/
1
) until stop.
•
Use the angled screwdriver to loosen the set
screw (3-18 /
4
) on the eyepiece adapter.
•
Pull out the lens mount (3-18/
5
).
•
Unscrew eyepiece (3-18/
6
) from one of the
eyepiece tubes.
•
Screw lens mount (3-18/
5
, optical surface
pointing to the observer) onto the thread of the
eyepiece tube and tighten the screw until stop.
Caution! Do not touch the optics!
•
Screw sliding mount with thread M52 (3-18/
3
)
into adapter ring VAD-S70 (3-18/
2
) until stop.
•
Attach sliding mount (3-18/
3
) with adapter ring
(3-18/
2
) and camera (3-18/
1
) to the lens mount
(3-18/
5
) until the distance between the lower
edge of the lens mount and the lower edge of
the sliding mount measures approx. 18 to 20
mm. Then orient the components and tighten
the set screw (3-18/
4
) using the angled
screwdriver.
Fig. 3-18
Attachment of SONY camera
"Digital Still Camera Cybershot DSC-
S70"
Summary of Contents for Stemi DV4
Page 1: ...Stereomicroscopes Stemi DV4 Stemi DV4 SPOT Stemi DR 1040 Stemi DR 1663 Operating Instructions...
Page 6: ...ILLUSTRATIONS Carl Zeiss Stemi DV4 DR 0 6 B 40 003 e 08 00...
Page 10: ...INTRODUCTION Carl Zeiss Stemi DV4 DR 1 4 B 40 003 e 08 00...
Page 18: ...DESCRIPTION Carl Zeiss Stemi DV4 DR 2 8 B 40 003 e 08 00...