Stativo M LED
MONTAGGIO DELL'ILLUMINAZIONE CON LUCI TRASMESSE M LED
ZEISS
06/2016
435425-7144-008
3
It
alia
no
3
MONTAGGIO
DELL'ILLUMINAZIONE CON
LUCI TRASMESSE M LED
ATTENZIONE
Prima di montare l'illuminazione con
luce trasmessa spegnere lo stativo e
staccare il cavo di alimentazione dallo
stativo.
3.1
Montaggio modulo di
illuminazione con luce trasmessa
su campo chiaro M LED
•
Staccare il cavo di alimentazione dallo stativo.
•
Ribaltare con cautela lo stativo all'indietro e
appoggiarlo.
•
Svitare la vite Allen 3 mm (Figura 2/
1
) e
metterla da parte.
•
Rimuovere i coperchi (Figura 2/
2
e
3
).
•
Inserire il modulo di illuminazione con luce
trasmessa in modo che le due spine
(Figura 2/
4
) entrino nelle cavità (Figura 2/
5
) dal
lato inferiore dello stativo.
•
Spingere il modulo di illuminazione con luce
trasmessa contro la piastra dello stativo e
tenerlo fermo.
•
Avvitare la vite Allen 3 mm nel foro filettato
(Figura 2/
6
) dello stativo finché la punta della
vite nel fa presa nel foro del modulo di
illuminazione con luce trasmessa.
•
Stringere la vite Allen a mano.
•
Rimettere lo stativo in piedi ed eventualmente
fare in modo che non si ribalti regolando il
piede (Figura 2/
7
).
•
Reinserire il cavo di alimentazione nello
stativo.
Figura 2 Montaggio modulo di illuminazione
con luce trasmessa su campo chiaro
M LED