Before attempting to mount this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
These Rack Mount Brackets are used for mounting such as the WJ-GXE500, etc.
WV-Q204/1S can mount the unit on the rack.
WV-Q204/2S can mount side by side up to two or three units on the rack.
Rack Mount Bracket
Model No.
WV-Q204/1S
WV-Q204/2S
Instructions
The installation described below should be made by qualified service personnel or system installers.
Important:
Recommended tightening torque is M3: 0.78 N·m {8 kgf·cm}.
Precautions
q
Remove the four rubber feet from the bottom of the unit.
Preparations
Rubber feet
w
Remove four screws from the rear of the unit.
(Only for WV-Q204/2S)
