![background image](http://html1.mh-extra.com/html/zeiss/sl-120/sl-120_documentation_3313162043.webp)
Maintenance and care
000000-1490-499-GA-GB-090118
37
•
Due to its simple and compact construction, the SL 120 Slit Lamp is
almost maintenance-free. It is, however, necessary to clean the optical
components (objective, eyepiece) occasionally. To remove dust from
surfaces accessible from the exterior, use a soft brush.
•
Clean very dirty paint surfaces with a cloth moistened (not dripping) with
weak detergent.
•
Do not use acetone and acetone-based cleaning agents to clean the
device, as they could damage the surfaces.
•
Replace the paper pads after each patient.
•
Use the following utensils for cleaning the front lens:
−
Volk LensPen® cleaning pen
(available from optical retailers or directly supplied by ZEISS,
000000-0483-896)
•
To clean the front lens, the swab or lens-cleaning instrument should be
moved with a circular motion from the center of the lens to the edge. For
cleaning, switch on the illumination so that you can check the cleaning
effect.
•
Use the supplied dust cover to protect the device from dust when not in
use. Store all accessories in suitable storage boxes.
•
Disinfect the forehead rest and the chin rest with a suitable and approved
disinfectant.
Safety inspections
WARNING - RISK OF ELECTRIC SHOCK
The user is required to have the device inspected for safety once a year.
Safety inspections may only be carried out by persons authorized by
Carl Zeiss Meditec and solely according to the service instructions issued by
Carl Zeiss Meditec. For planning and implementing these safety inspections
please contact ZEISS Service or your local dealer.
Summary of Contents for SL 120
