Zeiss OPMI PROergo S7, Instructions For Use Manual

Page: 194 / 268

Operation S7 / OPMI PROergo
Version 11.0
Page 194 G-30-1435-en
Switching the device on and off

The included power cord (floor stand only) is connected.
• Observe the checklists starting on Page 180.
This is how to switch the device on or off:
• To switch it on, press the power switch (1) on the stand. When the device
is switched on, the indicator light in the power switch is illuminated.
• To deactivate it, press the power switch (1) on the stand.
The current for the power outlet socket cannot be switched off with the
power switch.
Operating procedure
1
CAUTION Never leave the device unattended when it is switched on!
If a patient or an object is exposed to the light source for a longer period of
time, this could cause burns or fire damage.
• Never leave a device unattended when its light source is switched on.
CAUTION Risk of injury caused by light in the facial area
Surgery using light in the facial area may seriously harm the patient's eyes.
• The patient's eyes must not be exposed to light.
• This light source must not be used in ophthalmology.