CHAPTER 1 - NOTES ON DEVICE SAFETY
LSM 880
Power Requirements
ZEISS
11/2014 V_05
000000-2071-466
7
The door interlock interface (Fig. 3/1) is covered
with a green plug to bypass a door interlock.
•
To use the interface remove the top of the
green plug and the bypass wire.
•
Then connect the wires of the door interlock at
the same position.
Two door interlocks can be connected.
The LSM 880 system is controlled by a remote
control. This remote control contains the main
switch for the system and the key switch for the
laser.
•
To start the system switch the main switch
(Fig. 4/
1
) to ON.
•
To activate the laser turn the key switch
(Fig. 4/
2
) to ON position.
Fig. 3
Door interlock interface (1) on the
back of the electronic rack (see
Fig. 2 top)
1
Main switch ON/OFF
2
Laser key switch
Fig. 4
Remote control of the
LSM 880 system