CHAPTER 1 - NOTES ON DEVICE SAFETY
ZEISS
User Interface
LSM 880
36
000000-2071-466
11/2014 V_05
Using and changing the dichroic filter of the
GaAsP NDD 2 channels
Imaging with the GaAsP NDD 2 channels:
•
Move the dichroic filter by turning the knob on
the front of the unit (Fig. 28/
4
) so its tip points
to the right position indicated as "NDD".
Observing the sample with the ocular or skipping
the detector for imaging:
•
Move the knob to the "Skip NDD" position.
Changing the dichroic filter:
•
Move the knob to the "Change" position.
•
Unfasten the four screws on the left hand side of the unit (Fig. 28/
1
) and remove the cap (Fig. 28/
2
).
•
Grab the filter holder (Fig. 28/
3
) and slide it out/in.
•
Reposition the cap and fasten it again with the four screws.
Do not leave the opening uncovered when working with the system.
Do not grab into the opening or insert any other device as you may damage the unit.
Changing the emission filters of the
GaAsP NDD 2 channels
•
Unlock the special filter cube with the two
knurled screws on the right hand side of the
unit (Fig. 29/
1
).
•
Slide the filter cube (Fig. 29/
2
) in or out of the
opening.
•
Fasten the knurled screws to fix the filter holder
in its working position.
Do not leave the opening uncovered
when working with the system.
Do not grab into the opening or insert
any other device as you may damage
the unit.
Fig. 28
Changing the dichroic filters of the
GaAsP NDD 2 channels
Fig. 29
Changing the Emission filters of the
GaAsP NDD 2 channels