Carl Zeiss
KF 2
ICS
2-6
B 40-028 e 10/97
b)
Switch on the line/battery operation
Line operation
Connect KF 2
ICS
to line plug via line cable.
Set switch (2-6/
4
) to "Mains ON".
Set the required brightness using the "Dimmer Mains" control (2-6/
2
).
Battery operation:
Connect plug (2-6/
10
) of the "Control panel for battery" to socket (2-6/
5
).
Set switch (2-6/
4
) on the Standard KF 2
ICS
in position "Battery ON".
Set switch (2-6/
7
) on the "Control panel for battery" in position "Battery off".
Connect "Control panel for battery" to car battery (12 V DC) via connection clamps (2-6/
6
).
Note the correct polarity of the connection clamps!
Set switch (2-6/
7
) on the "Control panel for battery" in position "Battery on".
The green LED (2-6/
8
) lights up.
Set the required brightness using the "Dimmer Battery" control (2-6/
9
).
Depending on requirements, place attenuation filter or conversion filter on support (2-6/
3
).
Swing required objective (2-6/
1
) in the beam path.
Fig. 2-5
Switching on the line/battery operation
Summary of Contents for KF 2 ICS
