KF 2
ICS
Carl Zeiss
B 40-028 e 10/97
2-5
(5)
Switching on the line and line/battery modes
The illumination system of the KF 2
ICS
has been designed for operation using a power unit,
but is also available for line/battery operation on request. Subsequent conversion from line
operation to line/battery operation is not possible.
View the type label (4-2/
2
) to check whether the built-in lamp supply complies with the present
line voltage.
Should the line voltage not lie within the range of the built-in lamp supply, please get in touch
with the nearest Carl Zeiss agency.
a)
Switch on line operation
Connect instrument to the power plug via the
power cable.
Set the required brightness via the control
(2-5/
2
).
Depending on requirements, place attenuation
filter or conversion filter on support (2-5/
3
).
Swing required objective (2-5/
1
) in the beam
path.
Fig. 2-5
Switching on the line operation
Summary of Contents for KF 2 ICS
