B-0705-1 01/1992 (Digitized 07/2005)
VII
PRODUCT LIABILITY
The incident-light microscope camera JENA PLAN including original accessories or additional equipment may
only be used for the microscopy method described in this manual.
For any other use, possibly also of individual modules or components may from
Manufacturers will not accept any liability. This also applies to all service or
Repairs that are not performed by authorized service personnel. Also
invalidates all Garantie-/Gewährleistungsansprüche also for the parts that are not directly
were affected by the repair.
The following warnings are of particular importance:
The microscope JENA PLAN was in accordance with IEC Publication 348-78,
Safety requirements for electronic measuring instruments, designed and tested and is in a
safe state has been delivered.
This manual contains information and warnings that the
Operator must be followed.
JENA PLAN is a latest scientific and technical knowledge
designed optical microscope for visual, micro photographic or video
Investigation of microscopic objects. The appliance is only for the intended
Use purpose. The device is not for unattended operation
determined!
The microscope has no particular protection against samples with
corrosive, toxic, radioactive or other adverse health effects.
The allowable sample weight (<5 kg) must not be exceeded.
It is to verify that the mains voltage at the back of the con-
corresponds to the value passed.
JENA PLAN is a device of protection class 1
The mains plug shall only be inserted in a socket outlet provided with a protective
Ground contact is provided. This protective measure is not a by using
Extension cord be rendered ineffective without a protective conductor. If the
The mains voltage by means of an auto-transformer, must not by this protective conductor
are interrupted. Any interruption of the protective conductor inside or outside the
Device or the removal of the protective earthing terminal brings danger to the
Device users and is therefore prohibited.
If the microscope is connected to the network, devices internal
Lead terminals dangerous voltages and the opening of covers or
the removal of parts (if it is not functional reasons) can possibly
expose hazardous live parts. The device is therefore disconnected from the mains,
before it is opened for adjustment, replacement, maintenance or repair.
If an adjustment, maintenance and repair of the under-voltage device
inevitably, this activity the which is to be performed by a qualified person in order
is aware of the hazard involved.
Existing openings should not be affected by covering their effect
be.
Page 10
This also applies to vent slots on the bottom. Ventilation slots and
an other openings must be no tools, objects and liquids in the
Device access.
Summary of Contents for JENA PLAN HD 9x12
