10
11
EN QUICK GUIDE / CUSTOMER SERVICE AND WARRANTY
Power on/off
Press and hold the on/off button
(4)
to switch on the device. Press and hold the
on/off button
(4)
to switch off the device again.
Standby mode
Briefly press the on/off button
(4)
to switch the device to standby mode. Briefly press
the on/off button
(4)
again to switch the device back to observation mode.
A built-in proximity sensor
(17)
on the viewfinder
(10)
offers a touchless standby.
When the function is enabled (delivery state), the standby mode is activated
automatically after a few seconds as soon as the viewfinder
(10)
is removed from
the eye.
Observation mode
Look through the viewfinder
(10)
to observe the scene. Turn the diopter wheel
(8)
to
focus the screen. Turn the focus ring
(2)
on the lens
(18)
to focus on the scene.
Calibration
You can calibrate the device automatically or manually.
In automatic mode, the device automatically performs a calibration when necessary.
A gentle click should be heard. In this mode, you also have the option of performing
the calibration manually by pressing the Shutter button
(7)
and the menu button
(6)
simultaneously.
Another option is to select manual mode. Close the lens cap
(1)
in manual mode.
Now press the Shutter button
(7)
and the menu button
(6)
simultaneously. The device
is now calibrated again.
Zoom
In observation mode, the rotary wheel
(5)
can be used to zoom in and zoom out the
scene. You can zoom between 1.0x and 10.0x. The currently set digital magnification
is shown in the upper right corner of the display.
WARNING!
Please note the enclosed safety instructions and
regulatory information, they can also be found under:
www.zeiss.com/cop/safety
Navigation
Press and hold the menu button
(6)
to show the main menu on the display. Look
through the viewfinder
(10)
. The rotary wheel
(5)
and the menu button
(6)
are used
to navigate in the main menu.
Turn the rotary wheel
(5)
to the right to scroll right or down. Turn the rotary wheel
(5)
to the left to scroll left or up.
Briefly press the menu button
(6)
to select a menu item. This opens the submenu.
Make your settings using the rotary wheel
(5)
. Briefly press the menu button
(6)
to
confirm your selection and return to the main menu.
Press and hold the menu button
(6)
to exit the main menu and return to observation
mode. Alternatively, navigate to “Exit”. Briefly press the menu button
(6)
to return to
observation mode.
Color
The scene can be displayed in five pre-defined and three user-defined color modes.
Three favorite colors can be set in the observation mode via a shortcut by briefly
pressing the menu button
(6)
. The shortcut list can be adjusted under the menu item
“Color”.
Shooting mode
You have the possibility to take photos and make videos. Press and hold the Shutter
button
(7)
to switch between the two shooting modes. The symbol at the top left of
the display changes to indicate the selected mode. Briefly press the Shutter button
(7)
once to capture a photo or record a video. Briefly press the Shutter button
(7)
again
to stop a video recording in progress.
Connectivity and ZEISS Hunting App
You can connect your smarthphone with your device via Bluetooth, or if needed,
additionally via WLAN by means of the ZEISS Hunting App. Further information for
setup and use can be found in the detailed instructions.
Charging
Charge the device via the USB port
(16)
when the battery is empty. The battery
charge level of the device is shown in the lower right corner of the display. When the
charge level is low, the display changes to red.
