10
2.5 Correct mounting of BIKE+ all in one on the bike
Since BIKE+ all in one has a slope sensor inside, it is important to insert it into the rear fork
with the right direction. The front of the hub is marked with a small pin drilled on the left
shaft. Locate the pin as explained in the next figures. If the hub is not mounted correctly
you will receive a warning when connecting with the app (see 5.7),
2.6 Careful handling of the bike
Please observe the operating storage temperature of
BIKE+ all in one
. Protect the
charging connector from impacts that can damage it. Components can be damaged
if exposed to extreme temperatures.
!
CAUTION: ALWAYS seal the connector on BIKE+ all in one with the proper protection
cap (5) before riding. Using BIKE+ all in one without the protection cap will void the war-
ranty.
BIKE DIRECTION
