15
8. Disposal
For EU-countries only.
Do not dispose the pump into the domestic waste.
In accordance to the European guideline 2002/96/EG concerning electrical and electronic equipment and implanting into
national law used electrical tools have to be collected separately and supplied to an environmentally compatible
recycling.
9. Technical Modification
… without prior notice.
10. Fault, possible reason and recovery
Faults
Possible reasons
Recovery
Motor does not run
Power supply disconnected or wrong
Check the power outlet 230v 50Hz
Put in the plug
Impeller blocked
Remove the cover and clean the pump
and the tank from impurity
In case of recurrence consult the
customer service
Pump motor overloaded
If the pump motor does not switch on
automatically after cooling down,
consult the customer service
Control unit damaged
Consult the customer service
Pump motor damaged
Consult the customer service
Motor runs, but does not lift
Pressure pipe clogged / hose buckled
Remove clogging / buckling
Take a test run.
Pump ventilation clogged
Clean the ventilation hole at the pump.
Shutoff valve clogged / closed
Clean / open
Non return valve incorrectly fitted
Correct the direction / check the function
Motor runs in short intervals
Non return valve faulty
Replace/clean non return valve
Motor runs too loud
Impurity in the tank or in the pump
Consult the customer service
GB
B