11
1. General
1.1 Application
This operating instruction is valid for the waste water lifting unit type SWH.
Non-compliance with the operating instructions - in particular with the safety instructions - as well as non-manufacturer modification or use
of non-original spare parts will result in loss of guarantee coverage. The manufacturer accepts no liability for damage or injury resulting from
incorrect use of the equipment.
This compact unit can be used for household waste water from had basins, sink, washing machines which are located below the drain level
(i.e. in cellar rooms). This unit is designed only to pump household waste water and not harmful material. Sanitary towels, food, long- fibres,
sanitary articles and similar subjects are prohibited. It is not allowed to use this unit for sewage water from toilets.
This product may also pass as any other electrical equipment in cause of lacking electrical supply. If you may get any damages thereby,
please calculate in accordance to the use an emergency power generator, a second pump and/ or a network independent alarm system. As the
manufacturer we will be at your disposal after the buying for near information. In cause of defects or damages please contact your retail
trader.
Manufacturer:
ZEHNDER Pumpen GmbH
Zwönitzer Straße 19
08344 Grünhain-Beierfeld
Product variations SWH 100, SWH 170, SWH 190
Instruction last modified: 06/2009
1.2 Queries and Ordering
For queries and orders please contact your authorised retail trader.
1.3 Technical data
SWH 100
SWH 170
SWH 190
Input power P1
300 W
850 W
850 W
Motor power P2
130 W
430 W
430 W
Voltage
230 V
50 Hz
230 V
50 Hz
230 V
50 Hz
Nominal current
1.3 A
3.7 A
3.7 A
Nominal speed
2800 rpm
2800 rpm
2800 rpm
Max. capacity Q
max
8 m
3
/h
11.5 m
3
/h
14 m
3
/h
Max. head H
max
6 m
10 m
11 m
Pressure size
G 1 1/4“ FT
G 1 1/4“ FT
G 1 1/4“ FT
Capacitor
5 µF
8 µF
8 µF
Dimensions L / W / H
380 / 250 / 300 mm
The pumps at series SWH are applicable to a liquid temperature of max. 40°C (temporary 90°C).
The potential free contact is designed for a maximum switch current of 1(2) A /230V.
Materials
Characteristics
Housing
PE
Cover
ABS
Pump- housing
PP
Impellor
PA 6
Motor shaft
1.4021
Pressure pipe
PVC
Seals
NBR
GB
B
