Zehnder Rittling ComfoControl Luxe, Installer Manual

Page: 50 / 84

EN 21
Multiple malfunctions will be dis-
played in the “SYSTEM STATUS”
screen. Only “ERROR E2” is cur-
rently displayed.
Filter warning on the CC Luxe
If the ventilation unit's filters require
replacement, then the “FILTERS
– REPLACE FILTERS” warning ap-
pears on the CC Luxe display.
To replace (or clean) any filters,
please refer to the ventilation
unit's manual.
The filter warning can be reset as fol-
lows:
1. Press "
" to go to “system status”.
Wednesday
Check: Filter
Settings
GHE
Cooker hood
1
2. Press " " to delete the
“Filters - replace filters” warn-
ing.
System status
Filter E2
System status
Reset
2
Status information on the CC
Luxe
In the absence of error message, you
will see:
• “CHECK: OK” on the screen of
the CC Luxe.
Information on the status of your
ventilation and/or cooling system
can then be accessed. This goes as
follows:
1. Press " " to go to “system sta-
tus”.
Wednesday
Check: OK
Settings
GHE
Cooker hood
1
The “system status” screen displays
all the system data on the CC Luxe.
Inside temperature
Outside temperature
Bypass
GHE
Heater
ComfoCool
Filter remain
Comfo Control
Controller HR
21ºc
15ºc
Closed
Open
Not installed
Not installed
3 wks
Rev. 3.007B1.007
Rev. 0.000
System status
2
2. Press " " to return to the main
screen.
Malfunction alerts
Alerts of possible malfunctions can
be found in the ventilation unit's
manual. A copy of this manual is
available from the supplier of your
ventilation unit.
The system should remain connected
to its power supply unless the venti-
lation unit requires taking out of ser-
vice due to a serious malfunction or
for filter cleaning/replacement or any
other compelling reasons. When the
unit is unplugged, the dwelling will no
longer benefit from mechanical venti-
lation, and this can lead to problems
with damp and mould. Long-term
deactivation of the ventilation unit
must therefore be prevented.