Zehnder Rittling ComfoControl Luxe, Installer Manual

Page: 49 / 84

20 EN
6 Maintenance
The CC Luxe does not require main-
tenance. However, the ventilation
unit controlled by the CC Luxe does
require periodic maintenance. The
maintenance required by the venti-
lation unit is stipulated in the venti-
lation unit's manual. A copy of this
manual is available from the supplier
of your ventilation unit.
Software updates
If necessary, the CC Luxe software is
easy to update by means of an SD
card. An SD slot can be found on the
right-hand side of the CC Luxe. An
SD card with updated software ver-
sion is available from the supplier of
the CC Luxe. The software can be
updated as follows:
1. Insert the SD card into the right
of the CC Luxe, with the read
area away from the wall.
2. Wait for about 10 seconds.
3. Press the preferred software ver-
sion.
4. Press "OK".
5. Wait until both progress bars are
black and two buttons appear.
6. Press "OK".
7. Remove the SD card from the CC
Luxe.
7 Malfunctions
Certain system information can be
displayed on the CC Luxe:
– Error messages.
– Warning to clean or replace the
filters.
– Information on the status of
your ventilation and/or cooling
system.
In the event of a malfunction, the CC
Luxe will display the corresponding
code.
The CC Luxe display will show an 'A'
or an 'E', followed by a number.
In the event of a malfunction, reset as
follows:
1. Press "
" to go to “system
status”.
Wednesday
Check: Error E2
Settings
GHE
Cooker hood
1
2. Press “ ” to delete the
error message, for example “ER-
rOr E2”.
System status
Error E2
System status
Reset
2
Multiple malfunctions will be dis-
played as a list.