10 - EN
In the event a required ventilation setting
is being overridden by a signal from a
sensor (such as a CO2 sensor), an “A” is
displayed in the bottom righthand corner
of the CC Ease.
Setting the ventilation levels
The ventilation level can also be set
manually by setting this higher or lower.
A total of 4 ventilation volumes/levels can
be set. These are:
■
Setting A
Absent.
Use when house is
unoccupied;
At level A, the house is ventilated
using the minimum prescribed
ventilation volume.
The ComfoAir will switch to the
highest ventilation position set in
the house unless overruled by an
automated software programme.
■
Setting 1
Low.
Use for low ventilation
levels;
■
Setting 2
Medium.
Use if you require normal
ventilation;
■
Setting 3
High.
Use this position during
cooking, showering
and when additional
ventilation is needed;
■
Timer
Temporary high setting
Use this position during
cooking, showering and
when extra ventilation is
briefly required.
< 2 sec.
< 2 sec.
or
AUTO setting /
MANUAL
setting
MANUAL
setting &
higher/lower
