Zehnder EASY 5.0
4
Legal regulations
All rights reserved.
This manual has been compiled with the utmost care. Nevertheless, the publisher accepts no liability for damage caused
by missing or incorrect details in this operating manual. We reserve the right at any time and without prior notification to
change the content of these instructions in part or as a whole.
The information contained in these documents is the property of Zehnder Group. Any form of publication, whether in
whole or in part, requires the written approval of Zehnder Group. In-house duplication, designated for the evaluation of
the product or for proper use, is permitted and not subject to approval.
Zehnder manufacturer’s warranty
The current device terms are available online
(https://www.caladair.com/en/espace-client/media/sales-terms-and-conditions).
Hard copies can be obtained via our established sales channels.
Trademarks
All trademarks are recognised, even if they are not separately labelled. A missing label does not mean that an article or
sign is free of trademark rights.
© 2021 Zehnder Group
SAFETY AND ENVIRONMENTAL GUIDELINES
In accordance with the regulations in force, the installation and maintenance of the machine must only be carried out by
technically qualified personnel authorised for this type of appliance and work.
Use the necessary Personal Protective Equipment to avoid injury related to electrical, mechanical (injuries from contact
with metal sheets, sharp edges, etc.) and acoustic hazards.
Do not use the appliance for any purpose other than that for which it is designed. This appliance may only be used to
convey air free of hazardous compounds, construction dust, etc.
Move the appliance as described in the chapter on handling.
Grounding must be done in accordance with the applicable standards. Never switch on an ungrounded appliance.
Before carrying out any work, make sure that the unit is switched off and wait for the moving parts to stop completely
before opening the doors (fans).
During operation, inspection panels, doors and hatches must always be fitted and closed.
The appliance can only be switched on and off via the proximity switch.
The safety and control equipment must not be removed, short-circuited or disabled.
The installation must comply with fire safety regulations.
All waste produced must be handled in accordance with the regulations in force.
It is the responsibility of the installer of the equipment to ensure compliance with the regulations concerning noise
emissions inside the building and to adapt the installation and site conditions if necessary.
We accept no liability for damage resulting from misuse of the equipment, unauthorised repair or modification or failure
to observe these instructions.
Z-MASTER-V1122-CSY-INM-Zehnder Easy5.0