9
Contents:
page
Declaration of Conformity
9
1. General
10
1.1 Application
10
1.2 Queries and ordering
10
1.3 Technical data
10
1.4 Areas of application
11
2. Safety
11
2.1 Marking of information in the instruction for use
11
2.2 Personnel qualifications
11
2.3 Dangerous arising due to non-compliance with safety advice
11
2.4 Safety conscious working
11
2.5 Safety information for owner / operator
11
2.6 Safety information for maintenance, inspection and fitting
12
2.7 Non-manufacturer modification and spare part production
12
2.8 Unauthorised usage
12
3. Description
12
4. Installation and commencement of operation
12
5. Service / Maintenance
13
6. Warranty
13
7. Disposal
13
8.Technical Modification
13
9. Spare parts list
14
Appendix
Spare parts drawing
23
______________________________________________________________________________________________________
Declaration of Conformity
We the following
ZEHNDER Pumpen GmbH
Zwönitzer Straße 19
08344 Grünhain-Beierfeld,
declare that the pump
Series
TM
conform the following specifications:
- EEC-low voltage specifications 2014/35 EU
- EMV-Specifications 2014/30 EU
- Machinery Directive 2006/42/EG
Applied harmonised norms, particularly
- EN 809
- EN 60 335-1
- EN 60 335-2-41
- EN 50 081-1
- EN 50 082-1
Grünhain-Beierfeld, 22.06.2017
Matthias Kotte
Product development manager
________________________________________________________________________________________________________________
ATTENTION!
The user has to know all information from this manual before switching on this pump. He has to consider this during usage of the pump or
during maintenance.
-
A minimum distance between intake strainer of the pump and the bottom of the well of 500 mm is required!
-
Use the pump only when submerged!
-
Protect the pump against sand and stone
(otherwise the hydraulic of the pump will be blocked)
-
pump has no a built-in check valve, possibly depending on the application, a separate check valve is required
GB
B
