Regency Owner’s Manual
Page 9
3.0
CONTROL PANEL
The control panel is installed on the lip of the spa for easy and convenient access. The
Regency
model, consist of:
•
2 lines 20 character LCD display used to communicate the user Spa temperature,
Time of the day as well as date during normal operation. It is also use during
programming to convey all the information to the user.
•
10 membrane switches used to control all the different function of the Spa. They
are divided in 2 group:
Spa Control keys:
Pumps, Air Blower, Spa light, Done, Extra.
Status Control keys:
Up, Down, Programming
Note
If any of the keys in the control board is held depressed for more
than 30 seconds it will be disable, a message will be displayed
indicating this failure; after the depressed key is released it will
be reactivated. This feature will not allow the system to lock up
because of a collapsed or defective key.
3.0.1 Spa Control Keys
There are 7 Spa control keys: Pump1, Pump 2, Air 1, Air 2, Done, Spa Light and Auxiliary.
A Spa should have at least one water pump; optionally it could have a second or third pump, an
air blower, a mister or a fiber optic light setup and an extra device.
3.0.1.1 Water Pump 1 Key
Will control the primary pump which is usually a dual speed pump, the low speed is
used to filter the Spa and/or to circulate the water while the Spa is being heated. A
second depression of this switch will toggle between the high and the low speed of the
pump. If your primary pump is a single speed (HIGH speed) only, this switch will turn the
pump ON and OFF.
