Regency Owner’s Manual
Page 13
4.0.3.1 Clock Format
As described above after few seconds the system will enter the Programming mode and it will
display:
Clock modes are: 12 hours or 24 hours format.
If no changes are required a depression of either the Up or Down key will display the previous or
the next available settings.
While on this screen is being displayed a second depression of the programming key will allow
the user to set the desired clock mode by depressing the Up or Down keys.
4.0.3.2 Clock Setting
The next available setting will be the Clock Setting.
If the Clock format was set to the 12 HOURS format: a depression of the Programming key will
allow the user to set the HOURS, a second the MINUTES, a third either PM or AM, a fourth will
save the programmed value. Follow similar procedure for 24 HOURS format.
All the mentioned depressions have to be executed in order to set the time properly.
4.0.3.3 Date Setting
The next available setting will be the Date Setting.
While the above screen is been displayed a depression of the Programming key will allow to set
the DAY of the week, a second the MONTH, a third the DATE, a fourth the YEAR, a fifth will save
the programmed value.
Clock Format
<Current clock mode>
Clock Setting
<Current clock setting>
Date Setting
<Current date setting>
