Regency Owner’s Manual
Page 7
2.0
OVERVIEW
The Regency Spa Controller is a microprocessor based system designed to provide the
users with an efficient and effective way of managing their enjoyment time while using
a spa. It has been designed to provide you with maximum flexibility during the spa use
by allowing easy system programming that requires minimum effort. However it will
allow you to configure the inner workings of the spa if you choose to. The Spa could be
tailor to satisfy the user needs.
The Regency controller system package consists of:
2.0.1 Control Panel
This controller is installed on the spa consist of 10 push buttons (keys) that are used to
control pumps, air blowers, lights, any other auxiliary equipment as well as to program
the system. Some of its features are:
•
One 2 lines 24 characters LCD display.
•
10 momentary buttons used to select operation and controller settings.
•
Operating temperature 0°C to 85°C.
2.0.2 Relay Board
This board has been designed for installation below the Spa’s skirt. It provides the user
with the following features:
•
Could control for 2 pumps, 2 blowers, 2 auxiliary, lights, ozone and heater.
•
Inputs for sensing control switches.
•
Inputs for temperature sensors.
•
RJ45 connector for communication with the top controller.
•
120 or 240 Vac +/- 10% operation.
2.0.3 Temperature sensors.
The Regency system uses 2 temperature sensors: one sensor is installed on the heater
surface to provide overheat/freeze protection and the second is used to monitor the water
temperature.
2.0.4 System features
The Regency controller has been designed to meet all of the following conditions:
