7. Configurations
59
- RTP Payload Type
: use payload value in RFC2833.
•
Signaling QoS
: set the value of Signaling QoS, IP TOS and DiffServ are supported right
now:
- IP
TOS
: set service type when using this option. (see figure 7-21 )
- DiffServ
: set DiiffServ type if use this option. (see figure 7-22)
•
Signaling NAT Traversal
: two work modes supported:
- STUN(RFC
3489)
: namely, STUN server mode.Set the IP address and domain of STUN
server, and port if necessary if use this mode (see figure 7-23):
Figure 7-21
Signaling QoS - IPTOS - Service Type
Figure 7-22
Signaling QoS - DiffServ - DiffServ Type
Figure 7-23
Signaling NAT Traversal - STUN server mode
