7. Configurations
49
Note:
Save it and reboot the device to make the "speakerphone mic input gain" work.
7.2
Network Configuration
You need to set Ethernet port of the phone in Network Configuration menu. The phone has LAN
port and PC port. Among these, LAN port is for up connection with Ethernet, and PC port is for
down connection with PC or LAN.
•
LAN Port
: DHCP, static IP or PPPoE
- DHCP
: obtain IP address from DHCP server on the network.
- Static
IP
: if you do not have DHCP server or do not want to use the IP address allocated
by DHCP server, you may set fixed IP address for the phone. (see figure 7-7)
- PPPOE
: choose it if you use PPPoE line.
Input user name and password then save them.
•
802.1q
VLAN
: you may set VLAN application if you use static IP or DHCP server, select
"
Enable
" to show this page:
If enabled, set these two parameters:
- VLAN
ID
: set ID for VLAN, valid extent is from 2 to 4093;
Figure 7-6
Configurations - Network Configuration
Figure 7-7
Configurations - Network Configuration - Static IP